Designed as a "do it all" kit for the home mechanic or as a solid starter kit for the professional shop mechanic, the PK-63 is a very special 63 piece collection of our very finest shop tools. While it includes the tools needed to perform almost any basic repair or adjustment on the bike, the PK-63 also includes the specialty tools to perform many advanced repair tasks, such as installing and removing headset races, installing crown races, cutting fork steerer tubes, straightening derailleur hangers, tapping threaded frame braze-ons, dishing wheels, and more. The entire kit comes in a tough, oversized toolbox, which has plenty of extra room for additional tools and spare parts.
Contents:
AV-1 Axle Vise
BBT-5/FR-11 Bottom Bracket/ Cassette Lockring Tool for Campagnolo
BBT-9 Bottom Bracket for 16 notch external bearing crankset systems
BBT-18 Chainring Lockring/ Bottom Bracket Tool
BBT-22 Cartridge Bottom Bracket Tool (for 20 tooth internal splines, such as Shimano(r), FSA(r), etc.)
BT-2 Fourth Hand Brake Tool
BO-2 Bottle Opener
CBW-1 8 and 10mm Open End Wrench
CBW-4 9 and 11mm Open End Wrench
CC-2 Chain Checker Chain Wear Indicator
CCP-22 Crank Puller (square spindle type)
CCP-44 Crank Puller (ISIS Drive(r) and Shimano(r) Octalink type
CCW-5 Crank Wrench 14mm socket / 8mm hex
CM-5 Cyclone Chain Cleaner
CN-10 Cable Cutter
CNW-2 Chainring Nut Wrench
CRS-1 Crown Race Setting System
CT-3 Professional Screw Type Chain Tool
DAG-1 Derailleur Alignment Gauge
FR-5 Cassette Lockring Tool for Shimano(r) and similar brands
GP-2 Pre-Glued Patch Kit
GSC-1 GearClean Brush
HCW-4 36mm Box-End and Bottom Bracket Pin Spanner
HCW-5 Double-Sided Bottom Bracket Lockring Tool
HCW-15 32 and 36mm Laser Cut Headset Wrench
HHP-2 Bearing Cup Press
HMR-2 Bearing Cup Pres
PAW-12 12-inch Adjustable Wrench
PH-1 P-Handled Hex Wrench Set w/ Holder (7 Piece Set)
PPL-2 PolyLube 1000 Grease (tub)
PW-4 Professional Pedal Wrench
RT-1 Headset Cup Remover
SA-3 Heavy Duty Shop Apron
SBC-1 Spoke, Bearing, and Cotter Gauge
SCW-SET 13mm through 19mm Professional Shop Cone Wrench Set
SD-0 Screwdriver- cross tip #0
SD-3 Screwdriver- straight blade 3mm
SD-2 Screwdriver- cross tip #2
SD-6 Screwdriver- straight blade 6mm
SG-6 Threadless Saw Guide
SR-2 Professional Sprocket Remover
SW-0 Professional Spoke Wrench
SW-1 Professional Spoke Wrench
SW-2 Professional Spoke Wrench
TAP-7 3mm x 0.5 Tap For Rear Wheel Dropout Alignment Screws
TAP-8 5mm x .8 Tap For Water Bottle, Toe Clip, Fender, and Rack Bosses
Home
;){kind=link}
