Hope Pro4 Disc Microspline R T-A Hub, 12x148mm 28h - Orange
- A direct development from the Pro2 EVO hubs with stainless bearings throughout
- CNC 2014-T6 aluminum shell construction with (5) stainless, sealed cartridge bearings
- 44 tooth ratchet mechanism gives a 10% quicker engagement over the Pro 2 EVO
- 6-bolt/44mm-BCD International Standard disc mounting dimensions
- Rear 135mm: convertible from 10x135mm (Q/R) to 10x135mm (bolt-on), 10/12x135mm, or 12x142mm (thru-axle) with separate Pro4 specific kits
- Rear 150mm: specific shell dimensions to maximize wheel strength (to convert hub to 12x157mm spacing, use 12x142mm conversion kit)
- HG 8-11sp: Not compatible with HG 11sp road cassettes
- HG available in alloy for lighter weight or steel to reduce cogs digging in to splines
- DH hubs move the drive side spoke flange out to the shortened (7sp) cassette, allowing a far wider flange spacing over a standard hub, leading to a stiffer wheel build. The hub will accept either a 7sp cassette, a custom 7sp cassette built up from individual sprockets, or a SRAM 7sp DH cassette. 150/157mm or 135mm (Demo 8) widths
Item Specifications
- f/r: Rear (Micro Spline)
- axle/spacing (mm): 12x148 Boost
- hole: 28h
- freehub: aluminum
- weight: 311g