Refine your search
You may filter this list of products by category.
In Store products are available to view in our showroom. In Store orders usually ship the same or next business day.
These models are available for online purchasing and can be shipped directly to you.
The bottom bracket shell width is the width, in millimeters, of the frame where the bottom bracket is mounted.
Bottom brackets must fit the frames interface type. For example, an english threaded bottom bracket can only be installed on a frame that accepts english threading.
Cassette Chain Compatibility
Recently added to our product selection.
We define color as the main color of the item. It may have accents or highlights in other colors.
Bar clamp diameter is the diamater of the handlebar.
Stem length is measured from the center of one clamp to the center of the other clamp. This measurement is sometimes known as the reach or extension.
S.H.I.S clamp diameter is the steerer tube diameter.
Stem angles are measured perpendicular to the clamp. For example, a 90 degree stem is straight. Sometimes, this may also be refered to as a 0 degree stem. If two measurements are listed, the stem can be flipped for angling up or down.
Bolt Circle Diameter (BCD) is the diameter of an imaginary circle running through the center of the chainring mounting holes. It is always defined in millimeters.
These rings can be used in the inner position.
These rings can be used in the middle position.
These rings can be used in the outer position.
These rings can be used in single ring applications.
These single chain rings have special properties which help retain the chain on the ring.
Pedals have two common sizes of spindles - 1/2" and 9/16"
Tire ISO Diameter
The seatpost diameter must match to the seat tube diamater of your frame. If replacing a seatpost, you can usually find this measurement etched near the bottom of your current post.
Seatpost length is measured in millimeters. It is typically measured from the bottom of the post to the center of the rail mount.
Offset is often referred to as setback. This is the distance in mm that the clamp is offset from the center of the seatpost.
Rigid seatposts are the most common type of seatpost with no suspension or dropping capability.
Seatpost Clamp Style
The hub drilling is the number of spoke holes. It must match your rim spoke count.
This is hub spacing and is the width of the hub. It must match your fork specifications.
This should correspond to the type of brakes you have on the bike.
Buy this product and your entire order ships for free.
Some orders are inelligible for delivery discounts. See offer details for disqualifying products and destinations.