MenuMenuModern Bike

Thomson Elite Seatpost Silver - 27.2 mm x 250 mm

Thomson
Email this product to yourselfEmail this product to yourself

your price $114.95 + ships free

BuyBuy PART NUM 482311
Thomson Elite Seatpost Silver - 27.2 mm x 250 mm
  • Over 40% stronger on ultimate strength test than the strongest production seatposts on the market.
  • Over double the fatigue life of any other production models we tested. The tube and head of the Thomson seatpost are integral-machined from one single piece of high strength 7000 series aluminum. The head is not pressed or bonded in. This allows for superior strength and minimum weight, allowing higher strength at low weights.
  • Lightweight - approximately 188 grams (250 length) for road bikes and 228 grams (330 length) for mountain bikes. Natural ellipse bore inside tube for optimum strength to weight ratio.
  • We have a long 1.614 inch (41 mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most brand-x seatposts have grip lengths of .500 inch or more shorter than our grip length.
  • The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All brand-x seatposts we tested - every one of them - failed in catastrophic failure with the seat and clamp components - and sometimes pieces of the tube and head - flying off in all directions. This type of failure would dump the rider.
  • The Thomson seatpost has a clamp, head, and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Remember all brand-x posts we tested flew apart at less than 150 foot-lbs of torque. Under severe impact the Thomson seatpost would bend slightly and allows the rider to come to a safe stop or finish the ride. The ride could continue.
  • Every component of the Thomson seatpost is 100 percent American made. This includes all fasteners and forgings.
  • The Thomson seatpost has all parts captive and can easily be attached to a seat without disassembly.
  • Infinite tilt adjustment minus 5 degree and plus 29 degree.
  • Very low profile clamps - no seat interference - swivel nuts are down between the seat rails.
  • The designs and materials have passed extensive life and ultimate strength tests.
  • Every production lot of seatposts will have ultimate strength and fatigue tests performed. Our on going testing program insures that every production lot of seatposts meets Thomson standards.
  • Impact absorbing clamps - clamps, head, and assembly will spread and flex on impact to protect seat, rails, seatpost and rider.
  • Adjustments can be made to the tilt of the seat without moving the seat forwards or backwards.
  • Easy on seats - allows seat to survive heavy impact loads without bending rails.
  • Thomson
    Thomson Elite Seatpost Silver - 27.2 mm x 250 mm
    Thomson Elite Seatpost Silver - 27.2 mm x 250 mm

    your price $114.95 + ships free

    BuyBuy
    PART NUM 482311 In StockIn Stock ships freeShips Free

    In Stock

    Also consider:

    Customer reviews of this product:

    StarStarStarStarStar Highly recommended

    by Guy M. of Hialeah, FL
    Ownership: more than a year
    Tech Knowledge: somewhat high

    Pros

    Light and strong. Holds up to harsh riding. Highly recommended.

    Cons

    None so far.

    StarStarStarStarStar Tweeking my Motobecane

    by Dominick M. of Woodhaven, NY
    Ownership: a month
    Tech Knowledge: average

    Pros

    Installed easily

    Cons

    None so far

    Other Thoughts

    This is my attempt at tweeking my bikes for the most comfortable position. In this case using a 0 degree set back seat post to feel less stretched on the bike as I've had some neck discomfort in the past. I've put this type of seat post on all 3 of my bikes which are all road bikes with drop handlebars. The 31.6 mm went on the Motobecane and I don't use this one for commuting just every third weekend ride which is over 70 miles. I've done one of these rides on this bike so far and did not have any issues. How much more comfortable is it to be 1" closer to the handlebars it's hard to say because I'm always shifting back and forth in the seat anyway so there is no constant. Generally with me when I'm riding along with the wind at my back nothing hurts then when I'm fighting a head wind for miles and miles things start to hurt... go figure. I installed the 25.4 mm on the 75 Royce Union and a 27mm on my 03 Trek. All and all and with other adjustments I've made I'm more comfortable now than I've been in the past especially on the Trek. One note possibly because these posts have a smooth finish. The one I installed on the Royce Union which has a seat post clamp that is part of the frame the seat post will rotate about .25" during normal riding which is not a big deal so long as it does not slip down which it hasn't so far. Set up is a personnel thing and a 0 degree set back seat post is something you can try it you feel a little stretched out on your bike

    StarStarStarStarStar Thomson Elite Seatpost

    by Stephen B. of Sacramento, CA
    Ownership: several months
    Tech Knowledge: high

    Pros

    I Love the fact that the main part of the post is machined from one piece of metal. The finishing is top notch and it is super easy to adjust. There is quit a large range of adjustment. It fits my Cannondale frame perfectly and secures tightly. I have had no problems with the seat post slipping. My only criticism is this is the short post and it is much too long for my needs- most of it is inside the seat tube. That said, I am very happy with this product.

    Cons

    None

    More customer reviews

    Read all 5 customer reviews of this product. Reviews of Thomson Elite Seatpost Silver - 27.2 mm x 250 mm

    Write a review

    Would you like to write reviews of the products you've bought from Modern Bike? You can help other Modern Bike customers make informed buying decisions! Write Product Reviews

    Share this product:

    Thomson

    Thomson is leading with innovative design for two primary markets - aerospace and cycling.

    See all Thomson

    We define color as the main color of the item. It may have accents or highlights in other colors.

    Weight

    These products are one of our best sellers.

    These models are available for online purchasing and can be shipped directly to you.

    The seatpost diameter must match to the seat tube diamater of your frame. If replacing a seatpost, you can usually find this measurement etched near the bottom of your current post.

    Seatpost length is measured in millimeters. It is typically measured from the bottom of the post to the center of the rail mount.

    Offset is often referred to as setback. This is the distance in mm that the clamp is offset from the center of the seatpost.

    Seatpost Material

    Rigid seatposts are the most common type of seatpost with no suspension or dropping capability.

    Seatpost Clamp Style

    This is the part number or identifier for this item from the manufacturer

    In stock orders usually ship in 1-2 business days.

    This gives you an estimate of when an item should be available to ship once ordered.

    Sorry. This product is sold out and not currently available.

    You are browsing an Industry Catalog. We've simply republished information exactly as we got it from our supplier without curating or improving it. The product names, descriptions, and photographs within this expanded catalog have not been reviewed and may contain industry short-hand and technical jargon. Please carefully study each product before you place your order. learn more

    Buy this product and your entire order ships for free.

    Some orders are inelligible for delivery discounts. See offer details for disqualifying products and destinations.

    Thomson Elite Seatpost Silver - 27.2 mm x 250 mm

    your price $114.95 + ships free

    BuyBuy PART NUM 482311